Hytera BL2010 Li-Ion Battery for PD402i / PD482i / PD502i
The Hytera BL2010 is an original 2000 mAh lithium-ion “smart” battery for the PD402i, PD482i, and PD502i DMR portable radios. It operates at a nominal voltage of 7.4 V and has an IP67 rating. The “smart” battery’s microchip transmits charge data to the radio, supporting up to 22 hours of operation in 5/5/90 duty cycle mode. The battery has a service life of more than 500 charge-discharge cycles.
Authorized Dealer
Fast Nationwide Shipping
Technical Support & Programming
Bulk Pricing Available
Why Professionals Choose the Hytera Battery BL2010
The BL2010 battery has a capacity of 2000 mAh and provides up to 22 hours of operation based on a 5/5/90 duty cycle. It features an IP67 rating, allowing for use in dusty environments and enabling it to withstand brief immersion in water.
According to the manufacturer, the BL2010 is rated for over 500 charging cycles. Using a "smart" battery chip, this model transmits information about charge status and battery health to the radio and to Hytera intelligent chargers. This enables the charging curve to be adjusted and prevents overheating.
The operating range is -4°F to 140°F, so it holds up in cold storage and hot outdoor work. With a capacity of 2000 mAh, the battery weighs 3.6 ounces. This is heavier than a standard 1500 mAh battery, but the extra weight is offset by longer runtime and a sealed design.
The BL2010 works with the PD402i and PD482i DMR radios. It is also compatible with a number of discontinued models: PD412i, PD502i, PD562i, PD602i, PD662i, and PD682i.
AXDIGITAL is an authorized Hytera dealer and supplies the BL2010 as an OEM part.
Specification
Battery — Lithium-Ion Smart Battery BL2010
| Chemistry | Lithium-Ion (Li-Ion) |
| Capacity | 2000 mAh |
| Voltage | 7.4 V nominal |
| Battery Type | Smart battery |
| Runtime | Up to 22 hours (5/5/90 duty cycle) |
| Rated Cycles | Over 500 |
| IP Rating | P67 |
| Operating Temperature | -4°F to 140°F (-20°C to 60°C) |
| Weight | 3.6 oz (102 g) |
| Dimensions (H×W×D) | 84.2 × 52.6 × 18.2 mm |
FAQ
What's the difference between the BL2010 and the BP1503?
Both fit the same i-Series radios. The BL2010 is a 2000 mAh Lithium-Ion pack with an IP67 seal and up to 22 hours of runtime, at 3.6 oz. The BP1503 is a lighter 1500 mAh Lithium-Polymer pack at 3.1 oz, with less runtime and no IP rating. Choose the BL2010 for longer shifts and sealed protection, the BP1503 for lighter carry.
