Hytera HY2202 Li-Ion Battery for BD302i / BD352i
The Hytera HY2202 is the genuine 2200 mAh Li-Ion battery for the BD302i and BD352i portable radios. It runs at 3.8 V for 8.36 Wh of usable energy. The HY2202 is the current Hytera part number for the pack formerly sold as the BL2202, and it is a direct, interchangeable replacement.
Authorized Dealer
Fast Nationwide Shipping
Technical Support & Programming
Bulk Pricing Available
Why Professionals Choose the Hytera Battery HY2202
The HY2202 is Li-Ion at 3.8 V, rated at 2200 mAh for 8.36 Wh of energy. It charges in the CH10L22 drop-in charger, either on the radio or as a bare pack in the rear pocket. On a typical duty cycle, a full charge covers a shift — on the order of 16 hours in digital use. Actual runtime depends on transmit load, audio volume and temperature.
The HY2202 model is produced as a replacement for the Hytera BL2202 battery. Both models have the same capacity (2200 mAh), and the replacement requires no additional fitting. The compact pack suits the ultra-small BD302i and BD352i, which are built for grab-and-go carry.
When purchasing the HY2202 battery pack, you should pay attention to one important point. Aftermarket cells are sold under the old BL2202 label, and some are rated at 2000 mAh rather than the genuine 2200 mAh. A pack rated below 2200 mAh holds less energy and runs shorter per charge. The genuine HY2202 is the part Hytera specifies, at 2200 mAh and 8.36 Wh.
AXDIGITAL is an authorized Hytera dealer and supplies the genuine HY2202 for BD302i and BD352i fleets still in service.
Specification
Battery — Genuine Li-Ion Battery HY2202 (formerly BL2202)
| Chemistry | Lithium-Ion |
| Capacity | 2200 mAh |
| Voltage | 3.8 V (nominal) |
| Energy | 8.36 Wh |
| Dimensions (H×W×L) | 71.9 x 38.0 x 7.8 mm |
| Weight | 107 g |
| Ingress Protection | IP54 |
FAQ
Is the HY2202 only for the BD302i and BD352i?
The HY2202 is designed for the BD302i and BD352i. It may also fit other BD300-series radios that specify the BL2202 pack, so confirm your exact model with us before ordering. It does not fit the BD5-series — the BD502i, BD552i and BD612i — which use the BL1506 or BL2018. When in doubt, send us your radio's model number.
