Hytera BL2018 Li-Ion Battery for BD502i / BD552i / BD612i
The Hytera BL2018 is the EM 2000 mAh Li-Ion battery for the BD502i, BD552i and BD612i portable radios. It runs at 7.2 V nominal and carries an IP54 rating against dust and splashing. Weighing just around 107 g, it supports a full shift of operation in digital mode without adding noticeable weight to the radio.
Why Professionals Choose the Hytera Battery BL2018
Security personnel and technical staff who make heavy use of BD5i series two-way radios often face the issue of standard batteries running out of power unexpectedly. This problem is particularly noticeable with batteries that have been in service for two or three years. Since capacity loss occurs gradually, it is not always possible to anticipate a shutdown caused by a depleted battery. The Hytera BL2018 is a genuine 2000 mAh battery designed for the BD502i, BD552i, and BD612i models. It ensures the full operating time of the radio stations whose original batteries have worn out.
The BL2018 is a 7.2 V nominal voltage lithium-ion battery rated for 500 or more charge/discharge cycles. Its IP54 ingress protection rating allows for use in dusty environments and ensures resistance to splashing water, enabling outdoor operation in adverse weather conditions. The battery's operating temperature range is -20°C to 60°C during discharge and 0°C to 45°C during charging. The Hytera BL2018 is lightweight (approximately 107 g) and compact (84.7 × 52 × 17.8 mm), making it convenient to use. On a standard 5-5-90 duty cycle in digital mode, the 2000 mAh pack typically carries a full shift — on the order of 20 hours before recharge. Actual runtime depends on transmit load, audio volume and ambient temperature.
The difference between the BL2018 and a look-alike cell is charge behavior. Both may charge. Only the OEM pack uses the profile Hytera chargers expect. Off-spec cells age unevenly across a fleet, and can void the radio's warranty.
AXDIGITAL is an authorized Hytera dealer and supplies the BL2018 as an OEM part for BD5i-series fleets.
Specification
Battery — High-Capacity Li-Ion Battery BL2018
| Chemistry | Lithium-Ion |
| Capacity | 2000 mAh |
| Voltage | 7.2 V (nominal) |
| Rated Cycles | ≥ 500 |
| Operating Time | -20°C to 60°C (discharge); 0°C to 45°C (charge) |
| Dimensions (H×W×L) | 84.7 x 52 x 17.8 mm |
| Weight | 107 g |
| Ingress Protection | IP54 |
FAQ
How long does the BL2018 take to charge?
On the OEM rapid-rate charger, the BL2018 reaches a full charge in about 3 hours from empty. The CH10L23 single charger and the six-bay MCL19 both use MCU-controlled smart charging, which tapers current near the top to protect the cells. Expect longer if the pack is cold, or if it charges through a radio left powered on.
Is the BL2018 a higher-capacity replacement for the BL1506 that ships with BD5 radios?
Yes. BD5i radios ship with the 1500 mAh BL1506 as the standard pack. The BL2018 is the 2000 mAh high-capacity version — about a third more runtime in the same footprint. It fits the same BD502i, BD552i and BD612i bays and the same CH10L23 charger, at the same 7.2 V. No radio or charger change is needed to upgrade.